Teledyne BlueView
M900-Mk2
 S1 sonars are not compatible with Proviewer 4.0 and later (S2 and S3 sonars will have stickers on the rear of the head)
VideoRay ROV Compatibility Guide
 - Plug and Play with VideoRay Integration Conponents
 - Technically compatible, but requires DIY customer integration (see the  below).
 - Not compatible.
M900-2250-130-Mk2
S1 sonars are not compatible with Proviewer 4.0 and later (S2 and S3 sonars will have stickers on the rear of the head)
VideoRay ROV Compatibility Guide
- Plug and Play with VideoRay Integration Conponents
- Technically compatible, but requires DIY customer integration (see the below).
- Not compatible.
V Series
The V Series is being discontinued. No addition V series sonars are being ordered.
VideoRay ROV Compatibility Guide
- Plug and Play with VideoRay Integration Conponents
- Technically compatible, but requires DIY customer integration (see the below).
- Not compatible.
Accessory Compatibility Notes
 Please be aware that Teledyne BlueView
products may require integration including mounting fixtures, connectors, cables, software and/or configuration in order to function properly on VideoRay ROV systems. Contact VideoRay for more information about integration requirements.
Visit the Teledyne BlueView website: http://www.teledynemarine.com/blueview
Customer assumes all responsibility for Do It Yourself customer integration. VideoRay support is limited to providing techincal data as published on www.videoray.com. Diagnostic support is not provided. Successful operation is not guaranteed. Damage to equipment during integration or opeation may void the VideoRay product warranty.
|
